Видео

What glues and lubricants is used?

see thats pretty cool and stuff but like the plastic peice on the outside of the lens is broken so it cant work and idk what to do

Danke, das Video hat sehr viel gebracht!! Fehler behoben!!

how do u put everything back ?

Yea, this is a useful video if you slow it down a lot, buy a professional tool set and get 3-4 years training to ever hope to be successful. Total not worth watching if your looking for answers.

where did you get, or how can i get the orange replacement youve added? Bitte!

very nice work bro thanks i have this one me also make this like

Bro wire just broke down

Nice job.

Thank you, helped a lot with assembling.

My lens has a stuck aperture, do you think that disassembly and cleaning would likely fix it, or would parts need replacing?

If cleaning the lens need to change the power diaphragm ???? Or else directly cleaning the lens only ???

The East he(it) possible to send you an objective as that this for a reassembly. He(it) was defused(unsettled) to change the diaphragm but the impossible to go back up(to raise) him(it) for fear of breaking the objective. If it is possible, which would be the cost? Thank you

DIY ReChip sites.google.com/site/diyrechip/ DIY Sigma lens Rechip kit. The Rechip will fix your old Sigma lens Error messages on your new Canon body.Vintage Sigma rechipped lenses will work fine again. Error 99 and Error 01 will disappear. A low cost and easy install solution. Bring your old Sigma Lens back to life.

Hi there, could you fix my G10 with lens error? Thanks

wow! you make it look so easy. I'm going to give it a try but it's going to be a heck of an adventure! vielen dank.

Respekt! Machst du das beruflich?

I managed to fix my G10 zoom lens problem by gently tapping the camera face down on a cushion to dislodge dust - it worked the second time.

theme hospital?

Thank you very much for the instructions! - The only step I failed, was the unplugging of the loudspeaker (attached to the flash module). The tiny plug/socket was so tight, I could not unplug it. Also I used inappropriate ("normal") tweezers, so I clipped the cables off... ups, camera is now on permanent "mute" - not a huge loss for my old lady. The last step is a little hard to figure out: For opening the last module (black lens / sensor unit) in two "halves", one has to unplug (like the other cables) a connector attached to the motor and undo it from its fixed path. One connector is evilly glued and cannot be unplugged. (Probably on purpose to avoid easy repair.) Then the two halves fold up giving access to the inner part with gears and sensor. (This one connector stays in place and joins the two halves loosely together.)

habe dieses Problem mit einer Canon G11 - sieht so aus als ob der Beitrag aus Deutschland kommt - kann man mit Dir/Euch in Verbindung trete - ich wohne in Berlin ( 99 Euro ??? )

Can you pleeaassee share a slower version?? :) I am going to try and also fix the lense of my G10 on my own. Ur video makes it look so easy! Bitte! :)

I am trying to repair an SX210 IS, which is very similar to this, with a lens error. I checked the gears and they seemed fine, but there is a tiny spring that came out. The spring seems like it might be bent, but the problem is, I can't tell where the spring is supposed to go. It has two small loops on either end. Any idea?

Wundervoll aufgenommen. Hier ist ein Profi am Werk. Wie viel schneller als normal war denn das?

Hi Jakob....I have two G10's with the same problem, I don't suppose you would like to fix them for me?

Hi Jakob. How much for the same lens 24-105 f/4L IS USM water damage from washmachine with soap..? I'm from Danemark... :)

if that me, i would just can open without reasamble them all like the rfirst time lol

can help us how to clean the lens canon 50mm 1.4

play this back at .25 speed if you find life too exciting

Thanks for the video! I managed to fix our camera (lens wouldn't come out). Could not do the very last strep, but still managed to access the 3 wheels and give them a good clean. All back to normal now... Thanks again! Cheers.

Very cool video

Hi Jakob, great video. You 've almost encouraged me to do it by my self. Unfortunately the rear mount to fix the lens to the camera become half loose for the second time, and if I do not support the lens properly with care it just can "tilt" a little bit. On the back of the lens there's 4 screws and 2 of them become loose from the place were they are supposed to fix the rear mount. In the first time I send the lens to Canon repair center and they charged me more then 345€ to fix it. If I do it for the second time it will cost me maybe another 345€. I have already tried to tighten both screws but it seems they do not grab the nut. I do not know if the "nut" where this screws are screwed are very fragil plastic and they passed away, because is strange that this seems to happen so easily. Can you advise me?

Wow . Amazing! I am going to try this. Thank you!

hi, do you know if works with E18? ... could be same problem? thanks

Gibt es nicht zumindest nicht von Canon.

Jacob Danke fuer das Video, koenntest du bitte eine vorschlag geben von eine Kamera die gute preis-leistung hat wie der g12 geben aber ohne diser sorte fehler?

Incredible video Jacob Dral, thanks for putting on you tube for us. I found this video of a 24-105 lens which is doing exactly the same problem as my own, which started today ruclips.net/video/zfP8W-2JHTY/видео.html and I was wondering is there any replacement part that I need to change to fix this, would really appreciate your opinion if you have the time, thanks in advance. John.

Thank you. I learned how to work with 24-105 now. Do you have any service manual?

wow...ok ill just send it to canon

MY CANON POWERSHOT G5 SE LE SOLTO EL LENTE INTERNO

Hi Jakob, first of all, thanks for all your videos. They are very helpful. I have a 28-70mm 1:2.8L lens, but its taking pictures very soft loosing the sharpness. So I took it to a repair shop who told me that its the optical that is coming loose and it can't be fixed because there are no parts available. Would you please know what i can do in order to repair it properly bringing it back to a good usable condition? I thank you in advance for your help! 

For anyone disassembling this lens, the studs which he removes at around 2:42 have tiny markings on them to align the glass. Mark them and put them back exactly as you removed them or you will get problems with chromatic aberration and a less then optimal/sharp image.

nice work

That's really a great DIY film Jacob :-)

Hallo Jakob, danke für das video. Seit vor ca. einer Stunde steck der Zoom meines 24-105 bei ca. 70mm fest (bewegt sich nur am langen ende, von 70 -105) da ich in Kenya lebe kann ich das objektiv wohl kaum wo einschicken, brauch das Teil aber zum arbeiten und das schon sehr bald. Dein Video hat mich ermutigt es selbst zu versuchen, allerdings dachte ich immer das ein objektiv nach dem ausernandernehmen wieder kalibriert werden muss... geht das auch so? Dein Rat wäre sehr hilfreich da mir die Prozedur doch etwas angst macht und meine Arbeit sehr von dem Teil abhängt... danke nochmals!

Alright so I just finally got this back together, yes it took me over 5 hours because I kept finding either dirty glass after thought I cleaned it or a part that wasn't in the video and found out where it went when almost all back together. Now it feels a little tighter to zoom in/out but other than that it worked good and then saw the aperture eye would get stuck closed for a few shots. Now it is back to an Err 01 message every shot. I'm sick of this lens, gonna get rid of it and get the 70-200 and a 24 prime that should be a much better replacement than this hunk of crap. Hopefully I can at least even get $400 on eBay for it.

How much would you charge to fix this

How much would one have to pay to fix that?

U R Number One !!!!!

Hi, are you in uk, if so how much will you charge to fix my 24-105 error 01??? Please reply